Arcforge Pulse 8GB

Name: Arcforge Pulse 8GB
Brand: Arcforge
Price: 299 USD
Availability: InStock
Rating: 4.6 (1250 reviews)

4.6out of 5,(1,250 reviews)

$299

In stock

Tuned for crisp, fast 1080p.

8 GB GDDR6 on a 128-bit bus
Dual-slot compact design
Single 8-pin power connector
Fits most small cases

Free shipping over $150
Warranty included
30-day returns

Look inside

See what makes it tick.

Drag to rotate, press Explode view, and tap a hotspot or a part in the list to read its spec.

Loading 3D model

Triple-fan graphics card, taken apart layer by layer.

Illustrative 3D model. Real products may look different; the specs listed are this product’s.

Three axial fans push air through the heatsink. At idle they switch off entirely for silence.
Cooling
Dual-fan · aluminium fin stack
- Zero-RPM mode below roughly 55 °C
- Fan blades shaped to cut turbulence noise
- Dual ball bearings for a long service life
A vapor chamber sits on the GPU die and spreads heat to a dense aluminium fin stack through copper heat pipes.
Heatsink
Vapor chamber · nickel-plated copper heat pipes
- Vapor chamber contacts GPU and memory
- Heat pipes carry heat to the full length of the fin stack
- Thermal pads cool the power stage as well
The graphics processor does the heavy lifting: shading, ray tracing and AI upscaling.
Boost clock
2.46 GHz
- Thousands of shader cores run in parallel
- Dedicated ray-tracing and AI hardware
- Mounted with liquid-metal-grade thermal compound
Eight memory packages surround the GPU die and hold the textures and frame buffers.
Memory
8 GB GDDR6 · 128-bit
- Wide bus keeps the shader cores fed
- More VRAM means room for 4K textures
- Cooled by the same heatsink as the GPU
A multi-layer PCB carries the power stage that converts 12 V into the low voltages the GPU needs.
Power
1 × 8-pin · 550 W PSU recommended
- Multi-phase power stage with premium chokes
- Dual-BIOS switch for quiet or performance mode
- Single 16-pin connector delivers up to 600 W
A metal backplate stiffens the card, prevents sag and passively cools the back of the board.
Backplate
Machined aluminium
- Prevents PCB flex under a heavy cooler
- Thermal pads touch the memory modules
- Cut-out lets airflow pass straight through
The I/O bracket holds the display outputs and secures the card to the case.
Outputs
3 × DisplayPort 1.4 · 1 × HDMI 2.1
- DisplayPort 2.1 drives 4K at very high refresh rates
- HDMI 2.1 connects to TVs with VRR support
- Reinforced bracket takes cable strain

Full specs

Overview

About this product

A compact dual-fan card with 8 GB of GDDR6 — an easy upgrade for older systems and small-form-factor builds.

Specifications

Memory: 8 GB GDDR6 · 128-bit
Boost clock: 2.46 GHz
Cooling: Dual-fan · aluminium fin stack
Outputs: 3 × DisplayPort 1.4 · 1 × HDMI 2.1
Power: 1 × 8-pin · 550 W PSU recommended
Size: 242 mm · 2-slot

3D
Graphics CardsRated4.9(641)
Arcforge Nova 16GB OC
Triple-fan flagship for 4K and ray tracing.
$749
3D
Graphics CardsRated4.8(903)
Arcforge Nova 12GB
Smooth 1440p with room to spare.
$549
Best seller3D
ConsolesRated4.9(2,184)
PlayStation 5 Console
4K gaming with near-instant load times.
$479
3D
ConsolesRated4.8(1,320)
PlayStation 5 Slim
The same power in a smaller footprint.
$499

Arcforge Pulse 8GB

See what makes it tick.

About this product

Specifications

You might also like

Arcforge Nova 16GB OC

Arcforge Nova 12GB

PlayStation 5 Console

PlayStation 5 Slim