NVMe Gen5 SSD 1TB with Heatsink

Name: NVMe Gen5 SSD 1TB with Heatsink
Brand: Arcforge
Price: 179 USD
Availability: InStock
Rating: 4.7 (276 reviews)

4.7out of 5,(276 reviews)

$179

In stock

PCIe 5.0 speed with a finned heatsink.

Up to 10,000 MB/s sequential reads
Aluminium heatsink pre-installed
Hardware encryption support
5-year warranty

Free shipping over $150
Warranty included
30-day returns

Look inside

See what makes it tick.

Drag to rotate, press Explode view, and tap a hotspot or a part in the list to read its spec.

Loading 3D model

M.2 NVMe SSD with heatsink, controller and flash memory.

Illustrative 3D model. Real products may look different; the specs listed are this product’s.

A finned heatsink spreads controller heat and keeps the drive from throttling during long transfers.
Heatsink
Anodised aluminium fins
- Thermal pads contact controller and flash
- Low-profile design fits under most graphics cards
- Removable if your board has its own heatsink
The label shows model, capacity and certification marks and also acts as a thin thermal spreader.
Capacity
1 TB
Form factor
M.2 2280 with heatsink
- Copper-film label spreads heat
- Model and capacity printed on the surface
- Warranty seal underneath
Layers of flash cells stacked vertically store your data without any moving parts.
Capacity
1 TB
Endurance
700 TBW · 3D TLC NAND
- Stacked layers hold more data per chip
- TLC balances speed, capacity and cost
- Spare area extends endurance
The brain of the drive. It manages wear levelling, error correction and traffic to the flash chips in parallel.
Interface
PCIe 5.0 x4 · NVMe 2.0
- Eight flash channels read in parallel
- LDPC error correction protects data
- Hardware encryption support
A small DRAM chip stores the mapping table, keeping random reads and writes fast and consistent.
Cache
DRAM for address mapping
- Keeps random performance high when the drive fills
- Reduces write amplification
- Found on faster drives — budget models often omit it
A compact eight-layer PCB in the standard 22 × 80 mm M.2 2280 form factor.
Form factor
M.2 2280 with heatsink
- Fits any M.2 2280 slot
- Power-loss protection capacitors on select models
- Single-sided design for slim laptops
Gold fingers carry four PCIe lanes. The M-key notch makes sure only compatible slots accept the drive.
Interface
PCIe 5.0 x4 · NVMe 2.0
- Four PCIe lanes for NVMe speeds
- M-key notch for correct orientation
- Backwards compatible with older PCIe generations

Full specs

Overview

About this product

Gen5 bandwidth for workstations and enthusiast builds, with a low-profile aluminium heatsink to keep sustained speeds up.

Specifications

Capacity: 1 TB
Interface: PCIe 5.0 x4 · NVMe 2.0
Form factor: M.2 2280 with heatsink
Sequential read: up to 10,000 MB/s
Sequential write: up to 9,500 MB/s
Endurance: 700 TBW · 3D TLC NAND

3D
StorageRated4.9(2,302)
NVMe Gen4 SSD 2TB
Fast enough for every game and project.
$139
StorageRated4.8(3,180)
Portable SSD 1TB USB-C
Carry a whole game library in your pocket.
$99
Best seller3D
ConsolesRated4.9(2,184)
PlayStation 5 Console
4K gaming with near-instant load times.
$479
3D
ConsolesRated4.8(1,320)
PlayStation 5 Slim
The same power in a smaller footprint.
$499

NVMe Gen5 SSD 1TB with Heatsink

See what makes it tick.

About this product

Specifications

You might also like

NVMe Gen4 SSD 2TB

Portable SSD 1TB USB-C

PlayStation 5 Console

PlayStation 5 Slim